FAQ

Default solution folder, feel free to edit or delete it.

Props spinning without lifting off the ground.
Check to make sure that your props are on the correct motors:                  For the 1306 motors make sure the props with 'R...
Tue, 16 Aug, 2016 at 11:30 PM
I think I made a Brick, how do I fix it?
Thankfully, if you make a huge enough mistake on your configuration/settings/upload to cause your FC to stop responding you can get it back to factory ...
Tue, 6 Jun, 2017 at 10:42 PM
Where do I find the software for configuring my Atom?
 You can find all the software you will ever need at the following locations: Firmware/Tools BetaFlight Configurator CleanFlight Con...
Tue, 16 Aug, 2016 at 11:31 PM
My motors arm and spin up, then quickly stop.
 If your Atom spin up the motors, and the they quickly stop, and will not re-arm again unless you remove the battery and re-attach it follow these step...
Tue, 16 Aug, 2016 at 11:30 PM
My Atom flops around on the ground like a crazy badger.
 If you Atom is arming and then it immediately flips over, or jumps around crazily, or just spins in place, your motors may be spinning incorrectly,...
Tue, 16 Aug, 2016 at 11:30 PM
4-in-1 BLHeli Settings
You can tweak settings on your ESC using BLHeli Suite and the passthrough method. Watch the video below to learn how to:    Our default set...
Fri, 2 Sep, 2016 at 4:47 PM
RC Calibration (OSD)
When you first power on the Atom for the very first time it will automatically go into the calibration mode.  If you need to go into this mode manually plea...
Mon, 19 Jun, 2017 at 12:03 PM